Skip to content
This repository has been archived by the owner on Jun 3, 2020. It is now read-only.

HowToInstall17

Grant Gainey edited this page Dec 12, 2016 · 2 revisions

Spacewalk Installation Instructions

These are installation instructions for new installations of Spacewalk 1.7. If you are upgrading from older versions, see HowToUpgrade.

Spacewalk 1.6 installation instructions are available at HowToInstall16.


Prerequisites

  • Outbound open ports 80, 443, 4545 (only if you want to enable monitoring)
  • Inbound open ports 80, 443, 5222 (only if you want to push actions to client machines) and 5269 (only for push actions to a Spacewalk Proxy), 69 udp if you want to use tftp
  • Storage for database: 250 KiB per client system + 500 KiB per channel + 230 KiB per package in channel (i.e. 1.1GiB for channel with 5000 packages)
  • Storage for packages (default /var/satellite): Depends on what you're storing; Red Hat recommend 6GB per channel for their channels
  • 2GB RAM minimum, 4GB recommended
  • Make sure your underlying OS up-to-date.
  • If you use LDAP as a central identity service and wish to pull user and group information from it, see SpacewalkWithLDAP
  • Make sure your operating system is fully up-to-date.

Setting up Spacewalk repo

RPM downloads of the project are available through a yum repository

To use this repository install spacewalk-repo with commands below:

Red Hat Enterprise Linux 5, CentOS 5

rpm -Uvh http://spacewalk.redhat.com/yum/1.7/RHEL/5/x86_64/spacewalk-repo-1.7-5.el5.noarch.rpm

Red Hat Enterprise Linux 6, Scientific Linux 6, CentOS 6

rpm -Uvh http://spacewalk.redhat.com/yum/1.7/RHEL/6/x86_64/spacewalk-repo-1.7-5.el6.noarch.rpm

Fedora 15

rpm -Uvh http://spacewalk.redhat.com/yum/1.7/Fedora/15/x86_64/spacewalk-repo-1.7-5.fc15.noarch.rpm

Fedora 16

rpm -Uvh http://spacewalk.redhat.com/yum/1.7/Fedora/16/x86_64/spacewalk-repo-1.7-5.fc16.noarch.rpm

Nightly builds

If you want to use the nightly builds, install the spacewalk-repo package based on your operating system (see above) and then enable the nightly repository:

sed -i 's/enabled=0/enabled=1/' /etc/yum.repos.d/spacewalk-nightly.repo
sed -i 's/enabled=1/enabled=0/' /etc/yum.repos.d/spacewalk.repo

NOTE: Nigthly repo contains developers snapshot and it is not suitable for production environment. Especially beware that you might not be able to upgrade from the nightly installation to the next release, especially with respect to the database schema.

Additional repos & packages

Red Hat Optional Server 6

When using RHEL 6, make sure you are subscribed to following RHN channel:

  • Red Hat Optional Server 6

Jpackage repository

RHEL 6, SL 6, CentOS 6 and Fedora 15 & 16

For Spacewalk on EL 6 and Fedora, a couple of additional dependencies are needed from jpackage. If repo is broken, mirror list here: http://www.jpackage.org/mirroring.php Please configure the following yum repository before beginning your Spacewalk installation:

cat > /etc/yum.repos.d/jpackage-generic.repo << EOF
[jpackage-generic]
name=JPackage generic
#baseurl=http://mirrors.dotsrc.org/pub/jpackage/5.0/generic/free/
mirrorlist=http://www.jpackage.org/mirrorlist.php?dist=generic&type=free&release=5.0
enabled=1
gpgcheck=1
gpgkey=http://www.jpackage.org/jpackage.asc
EOF

We specifically want 5.0 generic directory in the above URL. Make sure, you do not use the jpackage-generic repository on RHEL 5.

EPEL repository

Spacewalk requires a Java Virtual Machine with version 1.6.0 or greater. EPEL - Extra Packages for Enterprise Linux contains a version of the openjdk that works with Spacewalk. Other dependencies can get installed from EPEL as well. To get packages from EPEL just install this RPM:

EPEL 5 (use for RHEL 5)

rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm

EPEL 6 (use for RHEL 6)

rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-7.noarch.rpm

CentOS 5

Follow the instructions to use EPEL 5 with the additions:

PostgreSQL Pre-Requisites

In order to get Spacewalk to run with PostgreSQL database backend, you need PostgreSQL 8.4 server installed on the same or different machine. Use PostgreSQLServerSetup as a guide to get the server installed and setup.

When using external PostgreSQL database, make sure the postgresql-contrib (or postgresql84-contrib on RHEL 5) package is installed on the database server.

Oracle Pre-Requisites

In order to get Spacewalk to run with Oracle database backend, you need:

  • Instant Client 11.2.0.2.0 installed on the Spacewalk machine
  • Oracle database server, either on the Spacewalk machine or on another host; versions 10g and 11g are known to work

Installation of the free but limited Oracle 10g XE database server can be found on the Oracle 10g Express Edition Setup page. Hints for making Spacewalk work with external Oracle database server are on the Full Oracle Setup page.

Installing Spacewalk

Just ask yum to install the necessary packages. This will pull down and install the set of RPMs required to get Spacewalk to run.

If you prefer the PostgreSQL backend:

yum install spacewalk-postgresql 

If you tend to use the Oracle backend:

yum install spacewalk-oracle 

Configuring the firewall

Spacewalk needs various inbound ports to be connectible. Use system-config-firewall or edit /etc/sysconfig/iptables, adding the ports needed -- 80 and 443. Add port 5222 if you want to push actions to client machines and 5269 for push actions to a Spacewalk Proxy, 69 udp if you want to use tftp.

Configuring Spacewalk

Your Spacewalk server should have a resolvable FQDN such as 'hostname.domain.com'. If the installer complains that the hostname is not the FQDN, do not use the --skip-fqdn-test flag to skip !

The setup requires that the database account has a password.

Note: Please don't use * '#' * (number sign/pound/hash) and * '@' * in your database password otherwise installation will fail.

Once the Spacewalk RPM is installed you need to configure the application, you can run:

spacewalk-setup --disconnected

An example session is as follows:

# spacewalk-setup --disconnected
* Setting up Oracle environment.
* Setting up database.
** Database: Setting up database connection for Oracle backend.
Database service name (SID)? XE
Username? spacewalk
Password? 
** Database: Testing database connection.
** Database: Populating database.
*** Progress: ####
* Setting up users and groups.
** GPG: Initializing GPG and importing key.
** GPG: Creating /root/.gnupg directory
You must enter an email address.
Admin Email Address? root@localhost
* Performing initial configuration.
* Activating Spacewalk.
** Loading Spacewalk Certificate.
** Verifying certificate locally.
** Activating Spacewalk.
* Enabling Monitoring.
* Configuring apache SSL virtual host.
Should setup configure apache's default ssl server for you (saves original ssl.conf) [Y]? 
** /etc/httpd/conf.d/ssl.conf has been backed up to ssl.conf-swsave
* Configuring tomcat.
** /etc/tomcat5/tomcat5.conf has been backed up to tomcat5.conf-swsave
** /etc/tomcat5/server.xml has been backed up to server.xml-swsave
** /etc/tomcat5/web.xml has been backed up to web.xml-swsave
* Configuring jabberd.
* Creating SSL certificates.
CA certificate password? 
Re-enter CA certificate password? 
Organization? Fedora
Organization Unit [spacewalk.server.com]? Spacewalk Unit
Email Address [root@localhost]? 
City? Brno
State? CZ
Country code (Examples: "US", "JP", "IN", or type "?" to see a list)? CZ
** SSL: Generating CA certificate.
** SSL: Deploying CA certificate.
** SSL: Generating server certificate.
** SSL: Storing SSL certificates.
* Deploying configuration files.
* Update configuration in database.
* Setting up Cobbler..
Cobbler requires tftp and xinetd services be turned on for PXE provisioning functionality. Enable these services [Y/n]?
cobblerd does not appear to be running/accessible
* Restarting services.
Installation complete.
Visit https://spacewalk.server.com to create the Spacewalk administrator account.

Should the spacewalk-setup fail, check the error it gives you and also investigate the logs in /var/log/rhn, as well as the logs from your database server, Apache server and tomcat.

Configuring Spacewalk with an Answer File

You can also configure Spacewalk by using an answer file, by running spacewalk-setup like

spacewalk-setup --disconnected --answer-file=<FILENAME>

An example answer file for the Oracle database backend:

admin-email = root@localhost
ssl-set-org = Spacewalk Org
ssl-set-org-unit = spacewalk
ssl-set-city = My City
ssl-set-state = My State
ssl-set-country = US
ssl-password = spacewalk
ssl-set-email = root@localhost
ssl-config-sslvhost = Y
db-backend=oracle
db-user=spacewalk
db-password=spacewalk
db-name=xe
db-host=localhost
db-port=1521
enable-tftp=Y

If you do not supply a value or leave out a key you will be prompted to supply that answer.

For PostgreSQL, you need to create something like this:

admin-email = root@localhost
ssl-set-org = Spacewalk Org
ssl-set-org-unit = spacewalk
ssl-set-city = My City
ssl-set-state = My State
ssl-set-country = US
ssl-password = spacewalk
ssl-set-email = root@localhost
ssl-config-sslvhost = Y
db-backend=postgresql
db-name=spaceschema
db-user=spaceuser
db-password=spacepw
db-host=host
db-port=5432
enable-tftp=Y

After spacewalk-setup is complete your application is ready to go!

Once you've made sure you can login to the Spacewalk WebUI, you can then proceed to the next step: Uploading Content.

Managing Spacewalk

Spacewalk consists of several services. Each of them has its own init.d script to stop/start/restart. If you want manage all spacewalk services at once use

/usr/sbin/spacewalk-service [stop|start|restart].
Clone this wiki locally