Skip to content
This repository has been archived by the owner on Jun 3, 2020. It is now read-only.

HowToInstallProxy23

Grant Gainey edited this page Dec 12, 2016 · 2 revisions

Spacewalk Proxy Installation Instructions

These instructions are for Spacewalk Proxy 0.2 onwards

If you're looking for instructions for the Red Hat Satellite Proxy product see the Red Hat Satellite documentation.

For more information on what Spacewalk is or for developer information see this page.

For Spacewalk proxy installation for Spacewalk 2.2 see HowToInstallProxy22

Prerequisites

  • Around 6GB storage per distribution under /var/spool/squid (or wherever you want your Squid cache to be)
  • Outbound open ports 80, 443, 4545 (only if you want to enable monitoring) and 5269
  • Inbound open ports 80, 443 and 5222
  • An upstream RHN Satellite server with an available Proxy entitlement or a Spacewalk server
  • Machine where you will install Spacewalk Proxy must be registered against Spacewalk Server, which you will proxy.
  • A provisioning entitlement for the Proxy server
  • Enable EPEL yum repository

Repository

RPM downloads of the project are available through yum repositories. Set up your yum to point to Spacewalk 2.3 repositories (including *-client). For the repo setup specifics, see HowToInstall#SettingupSpacewalkrepo.

Installation

Ensure your machine is registered in Spacewalk and has a provisioning entitlement. Then just ask yum to install the application:

yum install spacewalk-proxy-selinux spacewalk-proxy-installer

This will pull down and install the set of RPMs required for the installer to run. Below is an example of the set of packages pulled in:

===================================================================================
 Package                         Arch    Version          Repository         Size
===================================================================================
Installing:
 spacewalk-proxy-installer       noarch  2.3.13-1.fc21    spacewalk          50 k
 spacewalk-proxy-selinux         noarch  2.0.1-1.fc21     spacewalk          19 k
Installing for dependencies:
 rhncfg                          noarch  5.10.83-1.fc21   spacewalk-client   74 k
 rhncfg-actions                  noarch  5.10.83-1.fc21   spacewalk-client   47 k
 rhncfg-client                   noarch  5.10.83-1.fc21   spacewalk-client   44 k
 rhncfg-management               noarch  5.10.83-1.fc21   spacewalk-client   52 k
 rhnpush                         noarch  5.5.88-1.fc21    spacewalk          96 k
 rpm-build                       x86_64  4.12.0.1-5.fc21  updates           136 k
 spacewalk-backend               noarch  2.3.52-1.fc21    spacewalk         187 k
 spacewalk-backend-libs          noarch  2.3.52-1.fc21    spacewalk         157 k
 spacewalk-base-minimal          noarch  2.3.53-1.fc21    spacewalk          92 k
 spacewalk-base-minimal-config   noarch  2.3.53-1.fc21    spacewalk          78 k
 spacewalk-certs-tools           noarch  2.3.3-1.fc21     spacewalk          92 k
 spacewalk-proxy-broker          noarch  2.3.23-1.fc21    spacewalk          48 k
 spacewalk-proxy-common          noarch  2.3.23-1.fc21    spacewalk          66 k
 spacewalk-proxy-docs            noarch  2.3.1-1.fc21     spacewalk         4.9 M
 spacewalk-proxy-html            noarch  2.3.1-1.fc21     spacewalk          34 k
 spacewalk-proxy-management      noarch  2.3.23-1.fc21    spacewalk          26 k
 spacewalk-proxy-package-manager noarch  2.3.23-1.fc21    spacewalk          36 k
 spacewalk-proxy-redirect        noarch  2.3.23-1.fc21    spacewalk          33 k
 spacewalk-setup-jabberd         noarch  2.3.2-1.fc21     spacewalk          23 k
 spacewalk-ssl-cert-check        noarch  1:2.4-1.fc21     spacewalk          15 k

If this is the first time installing an RPM from the Spacewalk repo, yum will prompt you to install the GPG key:

Retrieving key from http://yum.spacewalkproject.org/RPM-GPG-KEY-spacewalk-2014
Importing GPG key 0x066E5810:
 Userid     : "Spacewalk <spacewalk-devel@redhat.com>"
 Fingerprint: 4bb1 438d 20ca af3a d230 e416 4160 5346 066e 5810
 From       : http://yum.spacewalkproject.org/RPM-GPG-KEY-spacewalk-2014
Is this ok [y/N]: y

Then you need to configure the proxy. Run:

configure-proxy.sh

and follow the prompts. This will download and configure the necessary packages. Once installed use /usr/sbin/rhn-proxy to stop and start the service.

You should now be able to navigate to the hostname of your proxy in a web browser and see the Spacewalk Proxy page. If you see an error here there's likely something wrong with your install.

Automated Installation

The configure-proxy.sh install script supports an answer file to allow you to preanswer the questions. For the full list of variables see "man configure-proxy.sh".

configure-proxy.sh --answer-file=proxyanswers.txt

proxyanswers.txt:

VERSION="2.3"
RHN_PARENT="spacewalk.example.com"
TRACEBACK_EMAIL="admin@example.com"
USE_SSL="Y"
CA_CHAIN="/usr/share/rhn/RHN-ORG-TRUSTED-SSL-CERT"
HTTP_PROXY=
SSL_CNAME_ASK=''
SSL_ORG="Example Org"
SSL_ORGUNIT="proxy1.example.com"
SSL_COMMON="proxy1.example.com"
SSL_CITY="New York"
SSL_STATE="New York"
SSL_COUNTRY="US"
SSL_EMAIL="admin@example.com"
POPULATE_CONFIG_CHANNEL="n"

As this example doesn't answer all the questions (e.g. SSL_PASSWORD) you'd still be prompted for that value. If you know that you've answered all questions then you can run with --non-interactive.

Clone this wiki locally