https://bugzilla.redhat.com/show_bug.cgi?id=750828
Description of problem: Version-Release number of selected component (if applicable): ipa-server-2.1.3-6.el6.x86_64 How reproducible: Always Steps to Reproduce: 1. [root@mudflap ~]# ipa-server-install --setup-dns --external-ca The log file for this installation can be found in /var/log/ipaserver-install.log ============================================================================== This program will set up the IPA Server. This includes: * Configure a stand-alone CA (dogtag) for certificate management * Configure the Network Time Daemon (ntpd) * Create and configure an instance of Directory Server * Create and configure a Kerberos Key Distribution Center (KDC) * Configure Apache (httpd) * Configure DNS (bind) To accept the default shown in brackets, press the Enter key. Existing BIND configuration detected, overwrite? [no]: yes Enter the fully qualified domain name of the computer on which you're setting up server software. Using the form <hostname>.<domainname> Example: master.example.com. Server host name [mudflap.testrelm]: Warning: skipping DNS resolution of host mudflap.testrelm The domain name has been calculated based on the host name. Please confirm the domain name [testrelm]: The IPA Master Server will be configured with Hostname: mudflap.testrelm IP address: 10.65.201.66 Domain name: testrelm The kerberos protocol requires a Realm name to be defined. This is typically the domain name converted to uppercase. Please provide a realm name [TESTRELM]: Certain directory server operations require an administrative user. This user is referred to as the Directory Manager and has full access to the Directory for system management tasks and will be added to the instance of directory server created for IPA. The password must be at least 8 characters long. Directory Manager password: Password (confirm): The IPA server requires an administrative user, named 'admin'. This user is a regular system account used for IPA server administration. IPA admin password: Password (confirm): Do you want to configure DNS forwarders? [yes]: Enter the IP address of DNS forwarder to use, or press Enter to finish. Enter IP address for a DNS forwarder: 10.65.201.66 DNS forwarder 10.65.201.66 added Enter IP address for a DNS forwarder: Do you want to configure the reverse zone? [yes]: Please specify the reverse zone name [201.65.10.in-addr.arpa.]: Using reverse zone 201.65.10.in-addr.arpa. The following operations may take some minutes to complete. Please wait until the prompt is returned. Configuring ntpd [1/4]: stopping ntpd [2/4]: writing configuration [3/4]: configuring ntpd to start on boot [4/4]: starting ntpd done configuring ntpd. Configuring directory server for the CA: Estimated time 30 minutes 30 seconds [1/3]: creating directory server user [2/3]: creating directory server instance [3/3]: restarting directory server done configuring pkids. Configuring certificate server: Estimated time 33 minutes 30 seconds [1/4]: creating certificate server user [2/4]: creating pki-ca instance [3/4]: configuring certificate server instance The next step is to get /root/ipa.csr signed by your CA and re-run ipa-server-install as: ipa-server-install --external_cert_file=/path/to/signed_certificate --external_ca_file=/path/to/external_ca_certificate [root@mudflap ~]# 2. [root@mudflap ca]# ipa-server-install --external_cert_file=/root/ca/ipa.crt --external_ca_file=/root/ca/ipacacert.asc The log file for this installation can be found in /var/log/ipaserver-install.log Directory Manager password: ============================================================================== This program will set up the IPA Server. This includes: * Configure a stand-alone CA (dogtag) for certificate management * Configure the Network Time Daemon (ntpd) * Create and configure an instance of Directory Server * Create and configure a Kerberos Key Distribution Center (KDC) * Configure Apache (httpd) * Configure DNS (bind) To accept the default shown in brackets, press the Enter key. Warning: skipping DNS resolution of host mudflap.testrelm The IPA Master Server will be configured with Hostname: mudflap.testrelm IP address: 10.65.201.66 Domain name: testrelm Using reverse zone 201.65.10.in-addr.arpa. Configuring certificate server: Estimated time 33 minutes 30 seconds [1/16]: creating certificate server user [2/16]: configuring certificate server instance [3/16]: disabling nonces [4/16]: creating CA agent PKCS#12 file in /root [5/16]: creating RA agent certificate database [6/16]: importing CA chain to RA certificate database [7/16]: fixing RA database permissions [8/16]: setting up signing cert profile [9/16]: set up CRL publishing [10/16]: set certificate subject base [11/16]: configuring certificate server to start on boot [12/16]: restarting certificate server [13/16]: requesting RA certificate from CA [14/16]: issuing RA agent certificate [15/16]: adding RA agent as a trusted user [16/16]: Configure HTTP to proxy connections done configuring pki-cad. Configuring directory server: Estimated time 31 minutes [1/35]: creating directory server user [2/35]: creating directory server instance [3/35]: adding default schema [4/35]: enabling memberof plugin [5/35]: enabling referential integrity plugin [6/35]: enabling winsync plugin [7/35]: configuring replication version plugin [8/35]: enabling IPA enrollment plugin [9/35]: enabling ldapi [10/35]: configuring uniqueness plugin [11/35]: configuring uuid plugin [12/35]: configuring modrdn plugin [13/35]: enabling entryUSN plugin [14/35]: configuring lockout plugin [15/35]: creating indices [16/35]: configuring ssl for ds instance [17/35]: configuring certmap.conf [18/35]: configure autobind for root [19/35]: configure new location for managed entries [20/35]: restarting directory server [21/35]: adding default layout [22/35]: adding delegation layout [23/35]: adding replication acis [24/35]: creating container for managed entries [25/35]: configuring user private groups [26/35]: configuring netgroups from hostgroups [27/35]: creating default Sudo bind user [28/35]: creating default Auto Member layout [29/35]: creating default HBAC rule allow_all [30/35]: initializing group membership [31/35]: adding master entry [32/35]: configuring Posix uid/gid generation [33/35]: enabling compatibility plugin Restarting IPA to initialize updates before performing deletes: [1/2]: stopping directory server [2/2]: starting directory server done configuring dirsrv. [34/35]: tuning directory server [35/35]: configuring directory to start on boot done configuring dirsrv. Configuring Kerberos KDC: Estimated time 30 minutes 30 seconds [1/14]: setting KDC account password [2/14]: adding sasl mappings to the directory [3/14]: adding kerberos entries to the DS [4/14]: adding default ACIs [5/14]: configuring KDC [6/14]: adding default keytypes [7/14]: adding default password policy [8/14]: creating a keytab for the directory [9/14]: creating a keytab for the machine [10/14]: exporting the kadmin keytab [11/14]: adding the password extension to the directory [12/14]: adding the kerberos master key to the directory [13/14]: starting the KDC [14/14]: configuring KDC to start on boot done configuring krb5kdc. Configuring ipa_kpasswd [1/2]: starting ipa_kpasswd [2/2]: configuring ipa_kpasswd to start on boot done configuring ipa_kpasswd. Configuring the web interface: Estimated time 31 minutes [1/13]: disabling mod_ssl in httpd [2/13]: setting mod_nss port to 443 [3/13]: setting mod_nss password file [4/13]: enabling mod_nss renegotiate [5/13]: adding URL rewriting rules [6/13]: configuring httpd [7/13]: setting up ssl [8/13]: setting up browser autoconfig [9/13]: publish CA cert [10/13]: creating a keytab for httpd [11/13]: configuring SELinux for httpd [12/13]: restarting httpd [13/13]: configuring httpd to start on boot done configuring httpd. Applying LDAP updates Restarting IPA to initialize updates before performing deletes: [1/2]: stopping directory server [2/2]: starting directory server done configuring dirsrv. Restarting the directory server Restarting the KDC Restarting the web server Configuring named: [1/9]: adding DNS container [2/9]: setting up our zone [3/9]: setting up reverse zone [4/9]: setting up our own record [5/9]: setting up kerberos principal [6/9]: setting up named.conf [7/9]: restarting named named service failed to start <<<<<<<<<<<<< [8/9]: configuring named to start on boot [9/9]: changing resolv.conf to point to ourselves done configuring named. ============================================================================== Setup complete Next steps: 1. You must make sure these network ports are open: TCP Ports: * 80, 443: HTTP/HTTPS * 389, 636: LDAP/LDAPS * 88, 464: kerberos * 53: bind UDP Ports: * 88, 464: kerberos * 53: bind * 123: ntp 2. You can now obtain a kerberos ticket using the command: 'kinit admin' This ticket will allow you to use the IPA tools (e.g., ipa user-add) and the web user interface. Be sure to back up the CA certificate stored in /root/cacert.p12 This file is required to create replicas. The password for this file is the Directory Manager password [root@mudflap ca]# 3. [root@mudflap ca]# ipactl status Actual results: [root@mudflap ca]# ipactl status Directory Service: RUNNING KDC Service: RUNNING KPASSWD Service: RUNNING DNS Service: STOPPED <<<<<<< HTTP Service: RUNNING CA Service: RUNNING [root@mudflap ca]# Error in named configuration. Expected results: no configuration errors and named starts successfully. Additional info: [root@mudflap ~]# cat /etc/named.conf // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { localhost; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; [root@mudflap ~]# cat /etc/named.conf options { // turns on IPv6 for port 53, IPv4 is on by default for all ifaces listen-on-v6 {any;}; // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; memstatistics-file "data/named_mem_stats.txt"; forward first; forwarders { [; '; 1; 0; .; 6; 5; .; 2; 0; 1; .; 6; 6; '; ]; }; // Any host is permitted to issue recursive queries allow-recursion { any; }; tkey-gssapi-credential "DNS/mudflap.testrelm"; tkey-domain "TESTRELM"; }; /* If you want to enable debugging, eg. using the 'rndc trace' command, * By default, SELinux policy does not allow named to modify the /var/named directory, * so put the default debug log file in data/ : */ logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; dynamic-db "ipa" { library "ldap.so"; arg "uri ldapi://%2fvar%2frun%2fslapd-TESTRELM.socket"; arg "base cn=dns, dc=testrelm"; arg "fake_mname mudflap.testrelm."; arg "auth_method sasl"; arg "sasl_mech GSSAPI"; arg "sasl_user DNS/mudflap.testrelm"; arg "zone_refresh 30"; }; [root@mudflap ~]#
Wow the forwarders stuff is really messed up ... I wonder how that can happen ...
I think this is same issue as we saw in training. It is a DNS problem. It actually does not matter if you use the external_ca or not. The problem is that you rename host in the course of the installation. This causes BIND to fail to restart.
It is same issue as #1931 may be different code path but same cause and effect. Martin please double check.
attachment freeipa-mkosek-158-fix-ipa-server-install-answer-cache.patch
Patch freeipa-mkosek-158-fix-ipa-server-install-answer-cache.patch sent for review
This issue is different. Because the option values set in the first part of the installation were incorrectly stored and restored, the named.conf contained malformed forwarders section:
[root@mudflap ~]# cat /etc/named.conf options { ... forwarders { [; '; 1; 0; .; 6; 5; .; 2; 0; 1; .; 6; 6; '; ]; }; ...
master: 32a506c[[BR]] ipa-2-1: c960e0a
Metadata Update from @mkosek: - Issue assigned to mkosek - Issue set to the milestone: FreeIPA 3.0 Core Effort - 2011/11
Login to comment on this ticket.