Timeline


and

10/04/15:

19:11 Documentation/FAQ edited by w1hkj
(diff)

09/30/15:

14:07 Changeset [4025e3c] by David Freese <iam_w1hkj@…>

Version 3.23.03

  • Maintenance release

09/28/15:

18:30 Changeset [c3b610b] by David Freese <iam_w1hkj@…>

FSQ trigger bug

  • Fix for trigger decode bug introduced by multiple directed station parsing

09/27/15:

14:40 Changeset [593686c] by David Freese <iam_w1hkj@…>

Version 3.23.02

  • Maintenance release

09/26/15:

13:38 Changeset [0424764] by David Freese <iam_w1hkj@…>

fsq cqcqcq

  • added cqcqcq button
    • casual users do not know to send cqcqcq vice cq cq cq
  • Updated on-line help
13:08 Changeset [198c5a0] by David Freese <iam_w1hkj@…>

fsq sounder/heard-aging

  • Increased allowable intervals for both sounder and heard-aging
  • Corrected repeated sounder to re-enable retries after a successful sounding.
    • sounder will wait until rx/tx state is RX
    • if Rx squelch is open then sounder will retry in 10 seconds. Retry is repeated 10x before sounding is rescheduled for next interval.

09/25/15:

12:14 Changeset [dbb169be] by David Freese <iam_w1hkj@…>

FSQ directive

  • Corrected text parser to accept multiple directed calls
    • w1hkj:efk2lbm w3fqn ka2cbc good morning all will now correctly accept k2lbm, w3fqn and ka2cbc as directed and display correctly in Rx text panel

09/24/15:

20:28 Changeset [d47b1e3] by David Freese <iam_w1hkj@…>

rigcat delayed startup

  • Add definable delay to allow serial devices based

on Arduino to not lock up in programming mode.

09/23/15:

21:42 Changeset [e6ebe70] by David Freese <iam_w1hkj@…>

OS-X serial

  • Change discovery code for OS X serial devices
21:41 Changeset [f75b92a7] by David Freese <iam_w1hkj@…>

asciidoc timezone

  • Run asciidoc with TZ=0 to make the footer datestamp independent of the build machine's timezone (for reproducible builds).

09/22/15:

19:40 Changeset [d5574e2] by David Freese <iam_w1hkj@…>

Version 3.23.01

  • Maintenance release
13:35 Changeset [8ad0a8b] by David Freese <iam_w1hkj@…>

WX configure

  • corrected inchs mercury to Hg vice Mg

09/20/15:

18:34 Changeset [0caa5ea] by David Freese <iam_w1hkj@…>

PA debug

09/18/15:

21:29 Changeset [ea18942] by David Freese <iam_w1hkj@…>

IFKP image slant

  • correct bug in slant correction code
21:29 Changeset [7cb4c66] by David Freese <iam_w1hkj@…>

ifkp avatar depth

  • Added code to support variable image depth in png source file
21:29 Changeset [838e112] by David Freese <iam_w1hkj@…>

WFALL-ONLY

  • fixes for wfall-only operation (N1MM)
13:46 Changeset [f472a17] by David Freese <iam_w1hkj@…>

Logbook read

  • Change read log routine
    • file read a line at a time vice entire image into RAM

09/13/15:

21:17 Changeset [9632b3a] by David Freese <iam_w1hkj@…>

Version 3.23.00

  • Major revison release
    • new modem types
    • change to MXE cross compiler version
21:17 Changeset [cbff7c3] by David Freese <iam_w1hkj@…>

Olivia/Contestia? start stop tones

  • add ability to disable start/stop tones in Olivia and Contestia
21:17 Changeset [f78aa38] by David Freese <iam_w1hkj@…>

Clear Tx Panel

  • clear entire Tx panel when executing a r or R sequence.

09/12/15:

20:02 Changeset [7b42e01] by David Freese <iam_w1hkj@…>

Macros

  • Added @WAIT macro
  • Added disable macro timer when changing modems
20:02 Changeset [ed3b09d] by David Freese <iam_w1hkj@…>

ifkp modem

  • Incremental Frequency Keyed + modem
    • wide band, moderate speed differential MFSK signal with offset +1.
    • sample rate 16000
    • symbol length 4096
    • 33 tones spaced 3xSR/symlen apart approximately 398 Hz bandwidth.
    • multiple image transfer formats similar to FSQ . Avatar (59x74 WxH pixel) image transfers
    • tunable modem subcarrier (center freq) . may be configured fixed at 1500 Hz or . set to Psk sweet spot
    • raw data received written to audit log - if enabled
    • heard list entries written to heard log - if enbled
    • assigned fldigi secondary RSID code, (56, 1171)
20:02 Changeset [37175e2] by David Freese <iam_w1hkj@…>

macro bug

  • fix timer seg fault when Tx contains trash text
20:02 Changeset [0606d1a] by David Freese <iam_w1hkj@…>

Doxygen help

  • Update to doxgen to 1.8.10
    • Corrected various doxygen parse errors
20:02 Changeset [db69617] by David Freese <iam_w1hkj@…>

LSB modes

  • Add recognition of flrig LSB modes
    • adjust waterfall for LSB
    • correct logging frequency for LSB
20:02 Changeset [6704797] by David Freese <iam_w1hkj@…>

Nu opBW combos

20:02 Changeset [2df24b8] by David Freese <iam_w1hkj@…>

MS Read logbook

  • change to "rb" for correct reading of logbook file
    • do not allow M$ to make changes to CR/LF counts
20:02 Changeset [d4b6308] by David Freese <iam_w1hkj@…>

QSO rec

  • Changed qsorec data store to an arrary of string pointers vice an array of strings.
    • new mxe implementation string handler changes from standard gnu string template
20:02 Changeset [c82de8e] by David Freese <iam_w1hkj@…>

MXE update

  • code changes for update to mxe suite
20:02 Changeset [30ad2a9] by David Freese <iam_w1hkj@…>

WEFAX hang on INFO

  • WEFAX rx becomes unresponsive when writing to INFO log

09/11/15:

14:37 Changeset [3d6e0b9] by David Freese <iam_w1hkj@…>

FSQ updates

  • Fix copy all on heard list
  • change default color scheme as requested by ZL1BPU
    • added user configuration items for RX text colors
  • remove "MONITOR" text from RX panel as requested by ZL1BPU
  • added fsq tx text queue to handle case when user tries to force a second transmit sequence when modem is already in TX state.
  • last_command updated to include both queued and transmitted text string.
    • allows recall of queued command even if transmit timed out
  • last_command changed to a stack of commands
    • allows recall of up to last 10 commands
    • each press of F2 recalls one deeper in stack
    • rotates back to beginning after recall of most ancient
  • add call to logbook using right click on heard entry
  • Fix erroneous date in audit log when fsq is default modem during program start
    • change format of date entry to make it easier to find when reviewing the log.
  • Added video text at beginning of transmit
    • also adds ability to transmit pretone for amplifier carrier detect for FM repeater operation
  • Add code to force center frequency to 1500 when switching from another modem
  • Fix to avoid time out errors
  • Macintosh OSX thread management
    • submitted by KK5VD
    • Ensure FSQ TX routines are called in the main thread.

09/09/15:

01:02 Documentation/HOWTO/BuildOnDebian edited by guitarpicva
ab4mw - add alsa-utils information for headless computers (diff)
Note: See TracTimeline for information about the timeline view.